thermal insulators| transpiring membranes| acoustic insulators| bioarchitecture| architectural mouldings|    
    home |   company | case history | trade fairs | Technical area - restricted access | contact us |  
thermal insulators
TERMOSYSTEM ONDA
Waterproof thermal insulator
  application diagram  
TERMOSYSTEM ONDA® Waterproofing thermal insulator

A waterproofing insulation system suitable for the thermal insulation of corrugated industrial roofs and for asbestos-cement rehabilitation. The system is easy to install and offers the advantage of not having to dismantle the preexisting structure, as installation is carried out over the existing covering.

TERMOSYSTEM ONDA® is a composite system produced by coupling a waterproofing bituminous membrane and an EPS* insulating panel, shaped according to the type of fibro-cement or asbestos-cement corrugated covering it is going to be laid on; in case of vaulted roof it will be precut accordingly.

ADVANTAGES:

• Easy and versatile installation
• Large surfaces covered in little time, great value for money
• Maintenance/modification operations carried out on the covering
• Asbestos-cement encapsulation

COMPOSITION:

TERMOSYSTEM ONDA® comes in the following versions:
• Cut to measure panels and ridge interaxis with two selvages on two sides at an angle.

• Panels precut at 90° for vaulted roofs.

1 Insulating material, PSE or PSE-G only
2 Polymeric bitumen
3 Glass fiber reinforcement or T.N.T. - polyester
4 Polymeric bitumen with ceramic coated granules

Technical characteristics

Technical characteristics of the ONDA elastoplastomeric polymer bitumen compound before

Description U.M. Smooth glass fiber Smooth polyester Standard
Shape stability in response to heat °C 110 110 EN 1110
Cold flexibility °C -5 -5 UNI EN 1109
Ultimate tensile strength – in the longitudinal direction % / ≤-0,25 EN 1107-A
Ultimate tensile strength – in the transverse direction % / ≤-0,25 EN 1107-A
Impermeability to water KPa ≥60 ≥60 UNI EN 1928
Ultimate tensile strength – in the longitudinal direction N50/mm 310 530 UNI EN 12311-1
Ultimate tensile strength – in the transverse direction N50/mm 205 400 UNI EN 12311-1
Elongation at break - longitudinal % 2 35 UNI EN 12311-1
Elongation at break - transversal % 2 40 UNI EN 12311-1
Tear resistance - longitudinal N 70 120 UNI EN 12310-1
Tear resistance - transversal N 80 120 UNI EN 12310-1
Resistance to static punching Kg 5 10 UNI EN 12730
ISOSYSTEM SRL - VIA DELL'ARTIGIANATO 25 - 31047 PONTE DI PIAVE (TV) - TEL. 0422 858070 - Reg. Imp., Cod. Fisc. e P. IVA 03281410260 Cap. Soc. € 110.000,00 i.v.
  thermal insulation |  insulating panels |  acoustic insulation |  formworks |  ventilated roof |  thermal insulators |  transpiring membranes |  acoustic insulators |  bioarchitecture |  architectural mouldings |  site map